We earn a commission if you buy through our links, at no extra cost to you.

Guide

Unitree G1 vs R1: Which Humanoid Should You Buy?

Unitree G1 vs R1 compared on official specs, versions (EDU and Air), size, battery, warranty, programming and where to buy, so you can pick the right humanoid.

By the Best Humanoid Robots editorial team Published

At a glance

Choose the Unitree G1 if you want the larger, more capable humanoid: 52 in (1,320 mm) tall, 23 joints and about 2 hours per battery, in a closed version. Choose the Unitree R1 Air for a smaller, lighter entry at 48 in (1,230 mm) and about 60 lb (27 kg). Neither Amazon version supports your own code, and neither does housework.

Unitree G1 vs R1: Which Humanoid Should You Buy?

Unitree makes the two humanoids that regular US shoppers can reach through Amazon: the G1 and the R1 Air. The names suggest a simple choice between a big one and a small one, but the real decision is about versions. Each model has a closed version, sold through Amazon and Unitree’s store, and an EDU version that supports your own software and is sold by quote. This guide compares them on Unitree’s own figures, as of November 22, 2026, and says who should buy which. For the wider field, see our ranking of the best humanoid robots you can buy in 2026.

We did not handle either robot. We compared Unitree’s product pages with press reports, and we say where a figure comes from. Unitree itself says that parameters may vary by scenario and configuration.

Specs Side by Side

Unitree G1Unitree R1 AirUnitree R1
Standing heightAbout 52 in (1,320 mm)About 48 in (1,230 mm)About 48 in (1,230 mm)
Footprint (W x D)17.7 x 7.9 in (450 x 200 mm)14.1 x 7.5 in (357 x 190 mm)14.1 x 7.5 in (357 x 190 mm)
Folded heightAbout 27 in (690 mm)Not listedNot listed
Weight with batteryAbout 77 lb (35 kg)About 60 lb (27 kg)About 64 lb (29 kg)
Degrees of freedom232026
Battery9,000 mAh quick-release, about 2 hoursQuick-release, about 1 hourQuick-release, about 1 hour
CameraDepth camera and 3D LiDAR, per Humanoids DailyMonocularBinocular
Secondary developmentNo (EDU only)NoNo (EDU only)
Warranty8 months6 months8 months

The EDU versions: the G1 EDU lists 23 to 43 degrees of freedom depending on options, about 77 lb (35 kg) or more, secondary development and an 18-month warranty. The R1 EDU lists 26 to 40 degrees of freedom, a binocular camera, secondary development and a 12-month warranty. Both are contact-sales on Unitree’s pages.

What the Amazon Versions Allow

Humanoids Daily reported on February 19, 2026 that the G1 on Amazon US is the base model labeled No Secondary Development, sold directly by Unitree, and described it as essentially a closed system. It is controlled by a handheld remote or a mobile app, with preset applets for tasks such as dancing and basic walking. Low-level programming and custom development are not supported, and it is not meant for AI training or manipulation research.

The R1 Air is the entry version listed in the Unitree store on Amazon; check its current availability on the listing. Unitree’s table lists secondary development for the R1 EDU only, so assume the Air is the same: use it as delivered. Neither version is a household helper. For what humanoids can and cannot do at home, read our guide on whether a humanoid can do household chores.

Unitree G1: The Larger, More Capable Humanoid

Unitree G1
Unitree G1

The bigger of the two Unitree humanoids, with 23 joints and about 2 hours per battery, for adults who want a full-size walking robot and accept a closed system.

The G1 has the stronger numbers in Unitree’s table: 23 degrees of freedom, a longer battery and an 8-month warranty. Humanoids Daily lists a maximum knee torque of 90 N.m and an integrated depth camera with 3D LiDAR on the Amazon unit. It folds to about 27 in (690 mm) for storage, which helps if you display it.

The trade-offs are weight and size. At about 77 lb (35 kg), moving it is a two-person job, and Unitree’s page warns that the robot is extremely powerful and that users should keep a sufficient safe distance. It also strongly advises individual buyers to understand the limits of humanoid robots before buying. Read our Unitree G1 profile for the full picture.

Unitree R1 Air: The Smaller, Lighter Entry

Unitree R1 Air
Unitree R1 Air

A smaller, lighter humanoid for adults who want hardware for demonstrations and curiosity, without the G1's size, and who accept an entry feature set.

The R1 Air gives up joints and sensing to be smaller: 20 degrees of freedom against the R1’s 26, a monocular camera against a binocular one, and a 6-month warranty, the shortest of the family. Battery life is about 1 hour for all three R1 versions. The Air is the version in the Amazon store, and the listing shows 18 and over. Our Unitree R1 Air profile covers what it leaves out.

If you want the R1’s extra joints and binocular camera, that is the R1, which Unitree sells on its own site. We do not link to it because it is not sold through our Amazon links.

Choosing: Who Should Buy Which

  • You want the most capable humanoid sold on Amazon. Choose the G1. It is bigger, has more joints and runs about twice as long per battery.
  • You have limited space or want something lighter. Choose the R1 Air, at about 60 lb (27 kg) against about 77 lb (35 kg).
  • You want to write code on a humanoid. Neither Amazon version supports it. Ask Unitree about the G1 EDU or R1 EDU, which are quotes, or consider a programmable kit such as the Hiwonder AiNex.
  • You want a household worker. Neither is one. Wait, and read our chores guide.
  • You are buying for a child. Do not. Unitree describes both as civilian products and warns about power, and the R1 Air listing shows 18 and over.

Where to Buy: Amazon, Unitree or a Reseller

There are three routes. Unitree’s own store lists its prices before tax and shipping, and Humanoids Daily described Amazon as a convenience route that avoids international shipping and customs, with domestic procurement and return protections. Resellers such as RobotShop list some Unitree models too. Our guide on humanoid robot prices lines up the manufacturer-announced figures, and we do not quote an Amazon price on this site: use the button on the listing for today’s number.

Whichever route you pick, check four things before you order: which exact version you are buying, the seller, the warranty terms and the return window. Because the warranty is only 6 to 8 months on the closed versions, the return terms matter more than usual.

The FCC Rule and Your Purchase

On July 28, 2026, the FCC added foreign-produced advanced robotic devices, including humanoid and four-legged robots, to its Covered List. The restriction applies to new models. The FCC notice says previously authorized models can still be imported, marketed and sold, and that consumers can keep using devices they bought. Unitree said its G1, H2 and R1 received authorization before the rule. K&L Gates cautions that the protection has limits: listing does not retroactively revoke authorizations unless the FCC acts further, and only certain software and firmware changes are covered by a waiver. For future Unitree models, see our release dates timeline.

Our Pick

If you are choosing between the two, the G1 is the stronger humanoid and the R1 Air is the easier one to fit into a room. Both are showpieces for adults, not tools. Pick on size and space first, and on EDU needs second.

Sources

Frequently asked questions

What is the main difference between the Unitree G1 and R1?

Size and capability. According to Unitree, the G1 stands about 52 in (1,320 mm) tall, weighs about 77 lb (35 kg), has 23 degrees of freedom and runs about 2 hours per battery. The R1 stands about 48 in (1,230 mm) tall, weighs about 60 to 64 lb (27 to 29 kg) depending on version, has 20 to 26 degrees of freedom and runs about 1 hour.

Can I program the Unitree G1 or R1 I buy on Amazon?

Not on the versions Unitree lists in its Amazon store as far as we can tell. Humanoids Daily reports that the Amazon G1 is the No Secondary Development version, and Unitree's R1 table lists secondary development for the R1 EDU only. Both EDU versions are contact-sales through Unitree.

Which one is better for a beginner in robotics?

Neither is a beginner programming platform in the versions on Amazon, because both are closed. If you want to learn to code a humanoid, a desk-scale kit such as the Hiwonder AiNex is a better match, and the EDU versions are the Unitree route for developers.

How much space do the G1 and R1 need?

The G1 is about 52 in (1,320 mm) tall standing and folds to about 27 in (690 mm). The R1 is about 48 in (1,230 mm) tall. Both are powerful machines that can fall, so Unitree tells owners to keep a safe distance. Plan a clear, flat, hard floor.

Is the Unitree warranty long?

It is short compared with most electronics. Unitree lists 8 months for the G1 and 18 months for the G1 EDU. For the R1 line it lists 6 months for the R1 Air, 8 months for the R1 and 12 months for the R1 EDU.

Are the G1 and R1 still being sold in the US after the FCC robot rule?

The FCC's July 28, 2026 action applies to new models, and the notice says previously authorized models can still be imported, marketed and sold. Unitree told investors that its G1, H2 and R1 were authorized before the rule. The FCC can act further, so confirm availability before you order.