The Unitree G1 is one of the few full-size, walking humanoid robots that a person in the United States can order through Amazon. That alone makes it newsworthy. It also makes it easy to misunderstand, because the same name covers two quite different products: the consumer version sold in Unitree’s Amazon store, and the research-oriented G1 EDU that Unitree sells through its sales team. This profile explains which one you are looking at, what Unitree says it can do, what to plan for in your space, and who should look elsewhere. For the full field, see our ranking of the best humanoid robots you can buy in 2026.
We did not handle this robot. We compared the figures on Unitree’s official product page with a report from Humanoids Daily and turned them into a plain-English guide. Where a number comes from a news report or from the Amazon listing rather than from Unitree, we say so.
Which G1 Is on Amazon?
According to Humanoids Daily, which reported on the launch on February 19, 2026, the G1 listed on Amazon US is the model labeled “No Secondary Development.” It is sold directly by Unitree, in Unitree’s brand store, and it is the base version rather than the G1 EDU. That label matters more than anything else on the page.
In practice it means the robot is a closed system. Humanoids Daily describes it as functioning primarily as a closed system, not as a blank slate for AI training or new manipulation research, and as aimed at buyers who want a capable humanoid out of the box without writing low-level code. Unitree’s own page agrees on the structure: it lists secondary development as a feature of the G1 EDU only.
The G1 EDU is a different purchase. Unitree lists it as contact-sales, with more degrees of freedom (23 to 43 depending on configuration), optional hands and waist upgrades, a stronger knee torque rating and an 18-month warranty. If you are a lab, a university or a developer who needs to run your own software on the robot, the Amazon button on this page is not the route to that machine. Ask Unitree.
Key Specs According to Unitree
The numbers below come from Unitree’s G1 page. Unitree adds that parameters may vary in different scenarios and configurations.
- Standing size: about 52 x 17.7 x 7.9 in (1,320 x 450 x 200 mm), so roughly 52 in tall.
- Folded size: about 27 x 17.7 x 11.8 in (690 x 450 x 300 mm), so the robot can be stored folded.
- Weight: about 77 lb (35 kg) with the battery.
- Degrees of freedom: 23 in total. Each leg has 6, the waist has 1 and each arm has 5. The standard G1 has no hands listed; the EDU offers an optional three-fingered Dex3-1 hand.
- Knee torque: a maximum of 90 N.m on the G1, against 120 N.m on the EDU.
- Arm load: about 4.4 lb (2 kg) per arm on the G1, about 6.6 lb (3 kg) on the EDU.
- Battery: a 13-cell, quick-release smart battery of 9,000 mAh, with a 54V 5A charger, and about 2 hours of battery life.
- Computing and sensing: an 8-core CPU, a depth camera and 3D LiDAR, a 4-microphone array and a 5W speaker, Wi-Fi 6 and Bluetooth 5.2.
- Other features: hollow cable routing through the joints, dual joint encoders, local air cooling, a manual controller in the box and what Unitree calls upgraded intelligent OTA, meaning continuing over-the-air software updates.
- Warranty: 8 months for the G1, 18 months for the EDU.
The Amazon listing may show slightly different headline figures. Humanoids Daily’s summary of the listing gives the standing height as 127 cm (about 50 in), where Unitree’s page says about 52 in (1,320 mm). The gap is small, but if the exact size matters for a doorway, a stage or a display case, measure against Unitree’s page and confirm with the seller.
What the G1 Can Actually Do
Be precise about this, because humanoid videos are persuasive. According to Humanoids Daily’s description of the Amazon version, you control the G1 with a handheld remote or a mobile app, and it comes with preset applets for things like dancing and basic walking. The depth camera and 3D LiDAR are there for sensing the space around the robot. Unitree’s page shows the over-the-air update system as a standing feature, which suggests the set of built-in behaviors can grow, but Unitree does not publish a roadmap on that page, so do not buy on the promise of future skills.
What the standard G1 does not do, according to the sources we opened, is run your code. The hardware has an 8-core processor and a full set of joints, but access to them for programming is reserved for the EDU. That is a deliberate product decision, not a defect, and it is why the Amazon version suits a different buyer.
There is also no claim from Unitree on this page that the G1 can do housework, fold laundry or cook. The standard version has arms with 5 degrees of freedom each and no listed hands, and Unitree rates the arm load at about 4.4 lb (2 kg). A humanoid that cannot hold things with fingers is not a household helper. If you came here because of a search for a humanoid robot for cleaning your house, the honest answer is that nothing on this list does that reliably today.
Size, Space and Safety
The G1 is a machine of about 77 lb (35 kg) with powerful leg joints. Unitree’s page tells buyers to keep a sufficient safe distance from people and to use the robot with caution because it is powerful. It also says buyers should understand the limitations of humanoid robots before purchasing, and that the product is for civilian use only. Unitree’s page does not list an age requirement, but a robot of this weight and strength is clearly an adult purchase, and we would treat it that way.
Practical planning, based on those figures:
- Clear floor space. A walking robot can fall. Plan an open area with a hard, flat, non-slip floor and nothing fragile, glass or stairs nearby.
- Supervision. Keep children and pets out of the room while it moves, and keep the remote in your hand.
- Lifting. At about 77 lb (35 kg), moving it is a two-person job unless you fold it and are comfortable with the weight.
- Battery handling. The battery is quick-release, and the charger is a 54V 5A unit. Follow Unitree’s manual for charging and storage.
- Runtime. About 2 hours per battery means short sessions. A second battery is something to ask about, since the battery is quick-release by design.
Warranty, Support and the Convenience Question
The warranty Unitree lists for the standard G1 is 8 months, shorter than the 18 months on the EDU. For a machine of this complexity, read the specific Amazon listing’s return and warranty terms and find out who handles repairs. Humanoids Daily’s headline refers to a “convenience premium” for buying through Amazon rather than direct from Unitree, and the article notes that the robot is sold by Unitree itself in both places. Check the current price with the button below and compare it with Unitree’s own store before you decide; shipping, taxes and import duties can differ between channels.
Pros and Cons
Pros
- A real bipedal humanoid with 23 degrees of freedom, available through a familiar retailer
- Folds to about 27 in (690 mm) for storage and transport
- Depth camera, 3D LiDAR and a microphone array for sensing
- Manual controller included, plus an app
- Quick-release battery and over-the-air updates, according to Unitree
Cons
- Closed system: no secondary development or SDK access on this version
- No hands listed on the standard version, and about 4.4 lb (2 kg) arm load
- About 77 lb (35 kg), so it needs space, supervision and care
- About 2 hours of runtime and an 8-month warranty
- Not a chore robot
G1 vs. the Neighbors
Next to the Unitree R1 Air, the G1 is the larger and heavier machine, with more joints (23 against 20) and a longer battery figure (about 2 hours against about 1 hour). Both Amazon versions are closed to secondary development. If you want a smaller humanoid and are comfortable with fewer joints and a shorter warranty, the R1 Air is the other real humanoid on our list.
Next to the Robosen collector robots such as the Optimus Prime Flagship, the G1 is a different kind of object. Robosen builds licensed, transforming display pieces with voice lines and app control. The G1 is a walking humanoid platform, even in its closed form. If you want a transforming truck, buy the truck.
Who Should Buy It
The G1 suits a buyer who wants a real humanoid for demonstrations, events, education displays, content creation or personal fascination, and who accepts that the Amazon version is a closed, preset-driven product. It also suits someone with room to operate it safely and a willingness to supervise it.
Skip it if you need to write your own robot software, if you want a household assistant, or if you are shopping for a gift for a young person. Developers should talk to Unitree about the EDU. Beginners who want to learn programming on a humanoid will get more out of a kit such as the Hiwonder AiNex, which is built for exactly that.
What to Check Before You Buy
- The version name. Confirm the listing says “No Secondary Development” and that you accept a closed system.
- Seller and warranty. Make sure the seller is Unitree’s store and read the warranty and return terms.
- Dimensions. Compare the listing’s height with Unitree’s figure of about 52 in (1,320 mm).
- Space and floor. Prepare a clear, flat area and a plan for supervising it.
- Expectations. Presets and remote control, not household tasks.
You can check current pricing and options here: Unitree G1 on Amazon. Buying through our link may earn a commission at no cost to you.
Sources