We earn a commission if you buy through our links, at no extra cost to you.

Product profile

Hiwonder AiNex: Specs, Pros & Cons

A ROS-based, 24-DOF biped humanoid kit with a Raspberry Pi 5 and a wide-angle camera. Specs from Hiwonder, who it suits, and what to check before buying.

By the Best Humanoid Robots editorial team Published
Hiwonder AiNex

Hiwonder AiNex

A serious desktop humanoid for ROS learners, students and makers who want to program walking, vision and grasping themselves. It is a hobby and education platform, not a helper for the home.

What we like

  • 24 degrees of freedom on the Standard Kit, with a 2-DOF head camera and hands that open and close
  • Built on ROS with Python, so it doubles as a real robotics learning platform
  • Free tutorials, source code and a drag-and-slider action editor for people who are not ready to code

Drawbacks

  • A kit for learners and makers, not a finished household robot
  • Hiwonder's page gives no battery runtime, and the spec table mixes Raspberry Pi generations

The Hiwonder AiNex is a small, aluminum biped humanoid designed to teach robotics, not to do your laundry. It walks on two legs, turns its head, looks through a wide-angle camera and, in its Standard version, can open and close its hands to pick up small objects. Its real selling point is the software underneath: it runs on the Robot Operating System (ROS), the open-source framework used in university labs and robotics companies, and it is programmed in Python.

This profile summarizes what Hiwonder says about the kit, explains who it suits and lists what to check before you buy. We did not build or run the robot ourselves. We compared the specifications on Hiwonder’s own product page and turned them into a plain-English guide. For how it stacks up against the other humanoids you can buy on Amazon, see our guide to the best humanoid robots of 2026.

The Short Version

Hiwonder describes the AiNex as an AI humanoid robot built on ROS, controlled by a Raspberry Pi and using self-stabilizing inverse kinematics. In plain terms, software calculates how each leg joint has to move so the robot can walk, climb steps, step over hurdles and adjust its height, turning radius and speed. Add a 2-DOF head camera and hands that open and close, and you have a platform for line following, target tracking, ball kicking, picking and sorting.

The trade-off is that you are buying a project, not an appliance. The AiNex is a good fit for someone who wants to learn how a real humanoid is programmed. It is a poor fit for someone who wants a robot that walks into the kitchen and does something useful on its own.

Key Specs According to Hiwonder

Everything below comes from Hiwonder’s official AiNex product page.

  • Degrees of freedom: 24 DOF for the Standard Kit and 20 DOF for the Starter Kit.
  • Size: about 7.6 x 5.3 x 16.3 in (193 x 135 x 415 mm) for the Standard Kit.
  • Weight: about 5 lb (2.25 kg) for the Starter Kit and about 5.4 lb (2.45 kg) for the Standard Kit.
  • Speed: about 8.3 in per second (21 cm/s), which is a bit under half a mile per hour.
  • Controller: a Raspberry Pi. The listing’s configuration choices on Hiwonder’s page are Raspberry Pi 5 with 2GB, 4GB or 8GB of memory. The 8GB version is the one in the Amazon listing we are profiling.
  • Camera: 120-degree wide-angle, 1 megapixel, manual focus, mounted on a 2-DOF head that moves up, down, left and right.
  • Servos: HX-35H, HX-35HM (with a magnetic encoder) and HX-12H serial bus servos. Hiwonder says the HX-35HM reaches a stall torque of about 486 oz-in (35 kg-cm) at 12V and reports voltage, position and temperature.
  • Sensors: an IMU with a 3-axis gyroscope, 3-axis accelerometer and 3-axis compass.
  • Power: an 11.1V 3,500 mAh 5C LiPo battery.
  • Software: ROS, Python, a WonderROS app for Android and iOS, and a PC “visual action editor.”
  • Storage: a 32GB SD card.

One detail is worth noticing. Hiwonder’s table lists the processor as a Broadcom BCM2711, which is the chip used in the older Raspberry Pi 4 family, while the configuration options name the Raspberry Pi 5. That looks like a leftover from an older version of the page. Before you buy, confirm in the listing and in the box contents which board you are getting. We would treat the Raspberry Pi 5 label in the configuration as the one to verify.

What You Can Do With It

Hiwonder’s page highlights a set of demonstrations: autonomous line following using PID control, passing under low obstacles, climbing and descending steps, and stepping over hurdles. It also lists color tracking and face detection, which it says run on the Raspberry Pi with OpenCV image processing, plus ball shooting, picking and sorting, and transportation of small items.

The hands matter here. The page says the hand servos provide angle and temperature feedback and have anti-blocking protection, which is meant to protect them when something jams. Grasping is the feature that moves a robot like this from walking and dancing into simple manipulation tasks. At this size, that means light objects on a table, such as blocks, balls and small parts, rather than anything you would find in a kitchen.

Some of the mechanical design choices are aimed at agility. Hiwonder says the AiNex has two hip joints so each leg can rotate around the vertical axis, which makes turning more flexible, and that the X, Y and Z axes coincide at the hips for orthogonal alignment. If you are the kind of person who enjoys reading about gait design, the company’s tutorials go further than we can in a profile.

Software: ROS, Python and the Action Editor

The software story is the reason to pick the AiNex over a simpler kit. ROS provides hardware abstraction, low-level device control, message passing between processes and package management, as Hiwonder’s page explains. It is the same framework you will meet in a robotics course, an internship or a research lab, so skills you build here carry over.

Hiwonder says it provides ROS source code and tutorials, including videos, schematics and experiment cases, free of charge through its learning site. The company says the robot is programmed in Python and that it supports deeper development on ROS and an SDK.

For people who want movement without writing code, there is the PC action editor. You adjust servo angles with sliders, save the motion to the control panel and trigger it from a command. That is a gentle on-ramp for a classroom or a first-time builder. Plan on learning Linux basics, SSH or remote desktop, and Python if you want to go beyond prebuilt actions.

Who It Is For

According to Hiwonder, the AiNex targets people learning AI vision and ROS. In practice, we think it fits:

  • University and advanced high school students taking robotics, computer vision or embedded systems.
  • ROS learners who want a physical robot that is small enough for a desk.
  • Serious makers who like to modify code and experiment with gaits and vision.
  • Teachers and clubs who can supervise assembly and provide Linux and Python support.

It is not the right choice if you want a humanoid for entertainment, collecting or display. For that, look at the Robosen models such as the Robosen Buzz Lightyear. If you want a less demanding Hiwonder humanoid that leans on voice and large AI models, see the Hiwonder TonyPi Pro profile.

What to Know Before You Buy

  1. Match the kit level. Hiwonder sells a Starter Kit (20 DOF) and a Standard Kit (24 DOF). Check the title and contents of the Amazon listing against the packing lists on Hiwonder’s page.
  2. Confirm the Raspberry Pi. The 8GB Raspberry Pi 5 configuration is the one in this listing. Verify it in the product details, given the inconsistent processor line in the spec table.
  3. Expect assembly and setup. The product page text we read does not say how much assembly the kit needs or whether it arrives built. Treat it as a kit: read the setup tutorials and the packing list first, and make time for assembly and calibration.
  4. Check the battery situation. Hiwonder lists an 11.1V 3,500 mAh LiPo battery but no runtime. LiPo packs need careful charging and storage, so read the manufacturer’s safety notes.
  5. Plan for skills. ROS and Python are the point. If you have never used a Linux command line, budget learning time.
  6. Mind the space. The robot stands about 16 in (415 mm) tall and walks at about 0.5 mph (21 cm/s). A clear, flat tabletop or floor area is enough.
  7. Know the store. Hiwonder sells through a store called LewanSoul on Amazon according to the listing details, so check the seller name on the page you buy from.

Pros and Cons

Pros

  • 24 DOF on the Standard Kit, with a 2-DOF head and hands that open and close
  • Real ROS and Python platform with free tutorials and source code
  • Walking, stair climbing, hurdling and line following demonstrations
  • A drag-and-slider action editor that lowers the entry barrier
  • Compact enough for a desk or classroom

Cons

  • It is a kit for learners and makers, not a finished robot
  • No runtime figure on Hiwonder’s page, and a spec table that mixes Raspberry Pi generations
  • Hands are for light, small objects only
  • Requires comfort with Linux, Python and ROS to unlock the best features

AiNex vs. the Neighbors

Against the TonyPi Pro, the AiNex has more degrees of freedom on paper (24 versus 20 on the Pro Kit) and is built around ROS, while the TonyPi Pro highlights ChatGPT-based voice and multimodal features. If robotics research habits matter most, the AiNex is the closer match. If conversational AI matters most, look at the TonyPi Pro.

Against the Unitree R1 Air, the AiNex is a much smaller tabletop platform. Unitree’s robot is a full-size machine intended for adults, while the AiNex is something you can set on a desk.

Who Should Skip It

Skip the AiNex if you want a finished robot that works out of the box, if you are not interested in programming, or if you hope it will do housework. It cannot. It is a well-specified learning kit, and it is best judged on that basis.

You can check the current price and options here: Hiwonder AiNex on Amazon. Buying through our link may earn a commission at no cost to you.

Sources

Frequently asked questions

What is the Hiwonder AiNex?

It is a small biped humanoid robot kit from Hiwonder, built on the Robot Operating System (ROS) and controlled by a Raspberry Pi. According to Hiwonder, the Standard Kit has 24 degrees of freedom and an aluminum alloy structure.

Do I need to know how to code to use the AiNex?

Not for everything. Hiwonder offers a PC action editor where you drag sliders to build movements without programming. Vision, walking logic and anything built on ROS means working in Python and ROS, so the deeper features reward some coding experience.

What is the difference between the Starter Kit and the Standard Kit?

Hiwonder's specification table lists 20 DOF and about 5 lb (2.25 kg) for the Starter Kit and 24 DOF and about 5.4 lb (2.45 kg) for the Standard Kit. Read the packing list on Hiwonder's page and match it to your Amazon listing before you order.

Can the AiNex pick things up?

Hiwonder says it can grasp and carry small items using hands that open and close, guided by the camera. Think light objects such as blocks and balls on a tabletop, not household chores.

Is the AiNex a toy for kids?

Hiwonder presents it as an AI and ROS learning platform. The mix of Raspberry Pi, Linux, ROS and Python makes it a better fit for older students, adults and classrooms with a teacher than for young children.

How long does the AiNex run on a charge?

Hiwonder's page lists an 11.1V 3,500 mAh LiPo battery but, in the text we read, does not state a runtime. Ask the seller or check the manufacturer's documentation if runtime matters for your project.